Opens in a new tab
1300 970 384
Contact
Account
Cart

Request A Quote

Complete the form below and one of our sales team will contact you shortly regarding your request.

Quote

Contact Us

1300 970 384[email protected]PO Box 903
Kenmore QLD 4069

Device Lockers: Do You Need Storage Only or Charging Too?

Device locker bank with a laptop inside an open compartment.

Choose storage-only device lockers when the main requirement is controlled storage and devices are charged elsewhere. Consider a purpose-built charging system when equipment needs to recharge during its time in the locker. Base the decision on the daily issue-and-return routine, device requirements and the proposed location.

Start with the device locker range and identify which configurations address your brief. Do not assume that every locker described for laptops, tablets or phones includes charging.

Map the Daily Device Routine

Record when devices arrive, how long they remain stored and when they are needed again. A workplace storing personal phones during a shift has a different requirement from a training facility issuing shared tablets between sessions.

For each device group, establish:

• Who owns and uses the equipment.
• Whether a compartment is assigned or shared.
• Typical storage time and the next required use.
• Where charging currently happens.
• Who checks devices in and out.
• Who handles missing keys, damaged equipment or charging faults.

Charging inside the locker is useful only if it addresses a real operating need. Avoid adding it solely because it appears to make the specification more complete.

Check the Device With Its Case and Accessories

Devices, protective cases and adapters beside an open locker compartment.

Use the largest device expected in the system, including its protective case. Measure the actual equipment rather than relying on screen size, which does not describe the device’s external dimensions.

Ask for clear internal compartment dimensions and the usable door opening. Check whether hinges, locks or other fittings intrude into the space. If accessories will be stored alongside the device, include them in the fit test.

For a charging configuration, confirm where the adapter sits and how the connector reaches the device without being trapped by the door. Allow for the manufacturer’s required cable routing and ventilation; do not assume that an empty compartment’s full volume is available for storage.

Specify Charging Performance, Not Just a Socket

FDB Lockers’ powered locker options are presented separately from general device storage. Use that distinction to request the exact charging arrangement for the devices you intend to use.

Provide device models, charger requirements, quantities and the time available between uses. Ask whether chargers are supplied or provided by your organisation, which connectors are supported, and how the system manages simultaneous charging.

A matching connector alone does not establish suitable charging performance. Nor should charging be confused with data synchronisation or device management. If those functions are needed, list them separately and obtain confirmation for the proposed model.

Do not retrofit a storage locker with an improvised powerboard and treat it as equivalent to a purpose-built charging system. Have the supplier confirm the intended configuration and installation requirements.

Plan Access and Location Together

Position the locker where users can collect and return equipment without obstructing a doorway or a busy route. Allow for open doors and several people arriving at once.

For a powered system, ask the supplier to specify the electrical supply, ventilation and service-access requirements. Have the site team confirm that the proposed location can meet them before ordering.

Decide who can open each compartment and how authorised staff regain access when a user is unavailable. Keep the access procedure proportionate to the equipment and the way it is shared.

Include the Handover and Maintenance Work

Staff returning a tablet to a workplace device locker.

A locker does not replace an equipment-management routine. Allocate responsibility for checking returned devices, identifying damaged cables, reporting faults and keeping the storage area orderly.

Confirm how a faulty charger or component is serviced and whether individual compartments can remain usable during maintenance. Request operating and care instructions for the selected system. Keep device damage and charging faults within your organisation’s established reporting process.

Before a larger rollout, test the proposed arrangement with representative devices and the people who will operate it. Check fit, access, the return routine and any required charging outcome.

Request a Quote Against One Device Schedule

Prepare a schedule listing device models, case dimensions, quantities, compartment requirements, access method, charging needs, location and delivery details. Separate essential requirements from optional functions.

Then request a device-locker quote from FDB Lockers. Ask the response to identify the exact configuration, included charging equipment where applicable, site requirements and responsibilities for installation and handover.

Share On

Leave the first comment